MATRIX 1000 - 700 WATT ACTIVE SPEAKER SYSTEM

* The MATRIX 1000 system is a complete sound reinforcement solution consisting of two 10" two-way speakers and an active 15" subwoofer. The subwoofer enclosure is equipped with a three channel amplifier and all the electronics required to run the system. The electronic circuitry was fine tuned to match the two-way speakers for the best possible sound. This system was designed for easy operation since you do not need to worry about tweaking frequencies and finessing levels. All you have to do is set up the system components, connect the XLR right and left signal cables, speaker cables and power cords and you're ready to go!

BUILT-IN 3-CHANNEL AMPLIFIER

* The 15" subwoofer enclosure is divided into two separate compartments. The front chamber serves as the cabinet for the 15" subwoofer. The rear chamber houses all of the system's electronic circuitry, which includes the amplification for alll three components, power supply and preamps. The 15" subwoofer has a power handling capability of 400 watts and a nominal impedance of 8 ohms.

10" TWO-WAY SPEAKERS

* The two 10" two-way speakers are loaded with b-52's custom 10" speakers and a 3/4" titanium diaphragm compression driver, mounted to a 900x400 constant directivity horn. The speakers are designed to be pole mounted, can sit as stage monitors and have built-in (3/8" - 16TP) flying hardware for permanent installations. The front panel of both two-way speakers is concaved so as to fit perfectly onto the subwoofers front grille for easy transport. Each two-way speaker has the power handling capability of 150 watts and a nominal impedance of 4 ohms.

TRANSPORTING THE SYSTEM

* To transport the system, simply set the subwoofer on its casters and place the two 10" two-way speakers onto the subwoofer's front panel facing down. Secure them with the included locking strap by fastening it to the bar handles on the side on the subwoofer cabinet. Place the included cover over the entire system and you are ready to move the system with ease.

DIMENSIONS:(TRANSPORT) 39"X19"X23" WEIGHT:165LBS

JBL PRO SOUND SYSTEM

* 2-JBL PRO MP-225 DUAL 15" 2-WAY SPEAKER

* 1-NUMARK 200FX 4-CHANNEL MIXER W/ EFFECTS

* 1-NUMARK CDN36 DUAL CD PLAYER W/SCRATCH EFFECT

* 1-CROWN CE2000 AMPLIFIER

* 1-AMERICAN DJ PDP850 POWER DISTRO

* 1-GRUNDORF HB1 MIXER/AMP RACK

* 1-STANTON DJ-PRO 300 HEADPHONE

* 1-SHURE PG58-XLR VOCAL MIC

* 2-PROEL SERIES 3 SIGNAL CABLE XLR

* 1-HOSA RMC-180 SCREWS

* 2-RAPCO P14-25 ON-ON

*FREE HB T-SHIRT

JBL PRO SOUND SYSTEM (SMALL)

* 2-JBL JRX 125 DUAL 15" 500 WATT SPEAKER

* 1-CROWN CE1000 AMPLIFIER

* 1-NUMARK CDN25 MKIII DUAL CD PLAYER

* 1-NUMARK DM1200 4-CHANNEL MIXER

* 1-GRUNDORF F2921 STAND

* 1-MRC8 RACK

* 1-AMERICAN DJ PDP850 POWER DISTRIBUTION

* 2-P14-25M-ON 25' SPEAKER

* 1-SHURE PG48 XLR MICROPHONE

* 1-STANTON PRO 300 HEADPHONE

* 1-HOSA CPP403G CABLE

* 1-HOSA CPR403G CABLE

*FREE T-SHIRT

JBL PROFESSIONAL AND CROWN

* 2 - JBL PRO JRX125 DUAL 15" SPEAKER - 500 WATTS - 5494

* 1 - CROWN CE1000 AMPLIFIER - 6399

* 2 - JBL PRO JRX125 DUAL 15" SPEAKER

* 1 - CROWN XLS602 AMPLIFIER

* 1 - AMERICAN AUDIO Q-SPAN 4-CHANNEL MIXER

* 1 - AMERICAN AUDIO DCD-PRO310 DUAL CD PLAYER

* 1 - STANTON DJ PRO 500MC HEADPHONE / MIC

* 1 - CABLE KIT

* 1 - RMC-180 SCREW KIT

* 1 - AMERICAN AUDIO PDP850 POWER DISTRIBUTION

* 1 - AMERICAN AUDIO TLC 8X14 POP UP SLANT TOP CASE

* 1 - B52 MATRIX 1000V2 700 WATTS SPEAKER SYSTEM

* 1 - NUMARK CD MIX1 DUAL CD PLAYER WITH MIXER COMBO

* 1 - PYLE PMDK101 SPEAKER KIT: 2-STANDS, 2-CABLES

* 2 - SERIES 3 3' CABLE

* 1 - NUMARK ROAD CASE FOR CD MIX 1

System Includes:

* 2 x CDI-300MP3 CD Players

* 1 x Q-D6 Mixer

* Case & component cables included